x

HD4 Home Music System

Tech_Specs
  • General Specifications

    Type
    Powered Bluetooth aptX HD speaker system

    Amplifier Type
    Class AB

    Power Output
    120 W peak power total (30 W RMS / 60 W peak per channel), AES

    Drivers
    4″ aramid fiber woofers

    0.75″ silk dome tweeters

    Inputs
    3.5 mm stereo mini-jack, USB, RCA L/R, Bluetooth

    Outputs
    RCA variable line-out, 3.5 mm mini-jack headphone out

    Input Voltages
    110-240 V 50/60 Hz auto-switching

    SNR
    >95 dB (typical A-weighted)

    THD+N
    <0.05% at all power settings Crosstalk
    <50 dB Frequency Response
    60 Hz-22 kHz ±1.5 dB

    Frequency Response w/ Bass Reduction Switch selected
    N/A

    Analog Input Impedence
    N/A

    Nominal Impedence
    N/A

    Input Impedence
    5K ohms unbalanced

    Crossover Frequency
    N/A

    Protection
    Output current limiting, thermal over-temperature, power on/off transient protection

    Power Consumption
    Idle: 10W

    Standby Consumption
    N/A

    Phase
    N/A

    Recommended Amplifier Power
    N/A

    Battery Life
    N/A

    Battery Charge Time
    N/A

  • Bluetooth Specifications

    Internal D/A Converter
    PCM 5102

    Internal BT Receiver
    N/A

    Input Bit Depth
    24 bit (padded)

    Bluetooth Receiver Type
    Bluetooth 5.0

    Supported Codecs
    aptX HD, aptX, AAC, SBC

    Supported Bluetooth Profiles
    N/A

    Wireless Operation Range
    Up to 100 ft (30 m) typical

    Input Data Rate
    Determined by Bluetooth

    Wireless Latency
    ~30 milliseconds (ms)

  • Usb Specifications

    Connector Type
    Micro-USB

    USB Device Class
    USB 1.1 or above

    Input Bit Depth
    24 bit (padded)

    Input Sample Rate
    44.1 kHz/48 kHz

  • Headphone Amp Specifications

    Headphone Amp Type
    OPA2134

    Full-scale Headphone Output Level
    2.0 V RMS

    Output Impedence
    2 ohms

    Recommended Headphone Impedence Level
    10 ohms to 10K ohms

  • Optical Specifications

    Internal D/A converter
    N/A

    Input Bit Depth
    N/A

    Input Data Rate
    N/A

  • Weights And Measures

    Dimensions (HWD)
    Each speaker – 9″(23 cm) x 5.5″ (14 cm) x 6.5″ (16.5 cm)

    Weight
    Left (active) – 7.2 lb (3.3 kg)
    Right (passive) – 5.4 lb (2.4 kg)

    Total Shipping Weight
    10 lb (4.6 kg)

    Shipping Box Dimensions (LWH)
    20″ (51 cm) x 13″ (33 cm) x 15.5″ (39 cm)

  • Environmental Requirements

    Operating temperature: 32 degrees F to 95 degrees F
    Non-operating temperature: -4 degrees F to 113 degrees F
    Relative humidity: 5% to 95% non-condensing

  • Materials And Construction

    0.7″ (18 mm) thick MDF cabinets with real wood veneer
    0.75″ (20 mm) silk dome tweeters with neodymium magnets
    4″ (101 mm) aramid fiber woofers with advanced voice coils

  • Cabinets

    To minimize unwanted resonances and distortion, Audioengine cabinets have thick high-resin MDF walls with extensive internal bracing. Heavy internal sound-damping material is used to reduce unwanted sound reflections inside the cabinet. All cabinet edges are rounded which look great and reduce high-frequency diffraction effects on the front baffles. The P4 cabinet contains tuned, front-port slots.

  • Furniture Grade Finishes

    The HD4 cabinets are available in several handsome finishes, including walnut veneers as well as satin black paint, offering options for complementing room furnishings. Also included are detachable grills that add further aesthetic advantages as they are firmly held in place with hidden neodymium magnets for a clean look.

  • Custom Components

    Audioengine designs and manufactures our own tweeters, woofers, and other critical components. In other words, these are not “box built” speakers with off-the-shelf parts but custom-designed to our specifications. What we do not fabricate directly in our factory we have made to our designs (parts such as transformers, magnets, and wiring harnesses, for example). The cabinets, drivers, bass port designs, amplifiers, and crossovers are all painstakingly tuned together for each Audioengine model. This, in turn, makes for a much more efficient system that requires much less power than passive speakers and a separate integrated amplifier or similar A/V components.

  • Based On Studio Monitor Designs

    Studio monitor speakers are used by producers and engineers in recording and production studios. They are designed with a theoretical flat frequency response which allows the engineer to create a final mix in such a way that the recorded music will sound good on most other speakers. Although Audioengine speakers are not designed to be up-close “nearfield” studio monitors, we do carry over much of the same higher-end technology, components, and design philosophy for all Audioengine speaker systems.

  • Efficient Integrated Design

    The speaker cabinets, drivers, innovative bass port designs, amplifiers, and passive crossovers are all critically tuned together for each Audioengine model. This, in turn, makes for a much more efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components. We build all this goodness into the left speaker cabinet to make it super-easy to connect your smartphone, tablet, computer, TV, network player or any other audio product.

  • High-quality Bluetooth Audio

    The Bluetooth built into the HD4 powered speakers features aptX HD coding which is an advanced Bluetooth audio codec with very impressive sound. And even if your phone or tablet does not have aptX HD, the HD4 Bluetooth solution is backwards-compatible with SBC and AAC codecs, as well as standard aptX, so you can wirelessly stream music from any Bluetooth-enabled device and still enjoy all your music. High-fidelity Bluetooth aptX HD that really works and sounds great. Here is why:

    Extended-range wireless.
    Most Bluetooth implementations have very limited range, typically within just one room. But with careful signal management circuitry and antenna tuning, we offer a superior solution that has up to 3 times the range of standard Bluetooth for multi-room use, with no degradation in audio quality.

    24 bit DAC
    The HD4 Bluetooth receiver and USB input both utilize the PCM 5102 DAC, widely known for its low-noise and high-fidelity. The PCM 5102 is used as an upsampling DAC and will pad all bit depths to 24 bit, achieving a higher signal-to-noise ratio and lower noise floor. Due to the high signal-to-noise specs of the PCM 5102, the fact that digital signal is upsampled to 24 bit as well as the added benefit of onboard triple redundancy power source conversion and filtering the HD4 Bluetooth implementation presents impressive low noise and low distortion characteristics with a noticeable improvement over other Bluetooth devices.

  • Hd3 Headphone Amplifier

    The HD4 contains a high-performance headphone amplifier based on the OPA2134 low-noise opamp. This amp is able to provide low-impedance, high-fidelity audio and a 2-volt output which easily drives a wide range of headphones.

  • Amplifier Design

    The amplifiers in powered Audioengine speakers are located in the left speaker and are a conservatively-rated class A/B analog monoblock design. This is a more traditional speaker/amplifier configuration which provides excellent quality audio and greater flexibility. All circuit boards for the power and preamp sections are vertically mounted for maximum mechanical shock protection.

  • Driver Designs

    Audioengine uses audiophile-quality, ferrofluid-cooled silk dome tweeters with neodymium magnets. Silk tweeters hold up well under high power and the edge-driven design gives very smooth response. The woofers are aramid fiber woven glass composite with rubber surrounds. Aramid fiber is obviously very strong, which means the woofer retains its shape when being driven at high levels.

  • Shielding

    Both drivers are directly video shielded and allow the user to place the speakers within a few inches of a video monitor. This shielding also offers protection for hard-drive digital music players.