Easy shopping - 10-second checkout - Guaranteed smiles

A2+ Wireless Computer Speakers

Tech_Specs
  • General specifications

    Type

    2.0 powered (active) multimedia desktop speaker system

    Amplifier type

    Dual class AB monolithic

    Power output

    60W peak power total (15W RMS / 30W peak per channel), AES

    Drivers

    2.75″ aramid fiber woofers, 3/4” silk dome tweeters

    Inputs

    3.5mm stereo mini-jack, RCA, USB, Bluetooth

    Outputs

    RCA variable line-out

    Mains voltages

    100-240V 50/60Hz auto-switching

    SNR

    >95dB (typical A-weighted)

    THD+N

    <0.05% at all power settings

    Crosstalk

    <50dB

    Freq. response

    65Hz-22kHz ±2.0dB

    Input impedance

    5K ohms unbalanced

    Protection

    Output current limiting, thermal over-temperature, power on/off transient protection

    USB specifications

    Connector type

    Micro USB

    USB device class

    type 1.1 and above

    Internal D/A converter

    CSR8670

    Input bit depth

    up to 16 bits native

    Input sample rate

    up to 48KHz native

     

  • Bluetooth specifications

    Internal BT receiver

    CSR8670

    Input bit depth

    16 bits

    Bluetooth receiver type

    Bluetooth 5.0 audio

    Supported codecs

    aptX low latency, aptX, AAC, SBC

    Wireless operation range

    Up to 100ft (30m) typical

    Input data rate

    Determined by Bluetooth

    Wireless latency

    ~30 milliseconds (ms)

  • Weights and measures

    Dimensions (each)

    6”(H) x 4”(W) x 5.25”(D)

    Weight (LEFT speaker)

    1.6Kg/3.55lbs

    Weight (RIGHT speaker)

    1.4Kg/3.15lbs

    Shipping weight

    4.6kg/10lbs per pair

    Shipping box dims

    10.5” (H) x 15” (L) x 7” (W)

  • Materials and construction

    18mm thick MDF cabinets
    3/4″ (20mm) silk dome tweeters with neodymium magnets
    2.75″ aramid fiber woofers with advanced voice coils

  • Finish options

    Satin Black Paint
    Hi-Gloss White Paint
    Hi-Gloss Red Paint

  • Environmental requirements

    Operating temperature: 32 degrees F to 95 degrees F
    Non-operating temperature: -4 degrees F to 113 degrees F
    Relative humidity: 5% to 95% non-condensing

  • Custom components

    Audioengine designs and manufactures our own tweeters, woofers, and other critical components. In other words, these are not “box built” speakers with off-the-shelf parts but custom-designed to our specifications. What we do not fabricate directly in our factory we have made to our designs (parts such as transformers, magnets, and wiring harnesses, for example). The cabinets, drivers, bass port designs, amplifiers, and crossovers are all painstakingly tuned together for each Audioengine model. This, in turn, makes for a much more efficient system that requires much less power than passive speakers and a separate integrated amplifier or similar A/V components.

  • Efficient integrated design

    The speaker cabinets, drivers, innovative bass port designs, amplifiers, and passive crossovers are all critically tuned together for each Audioengine model. This, in turn, makes for a much more efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components. We build all this goodness into the left speaker cabinet to make it super-easy to connect your smartphone, tablet, computer, TV, network player or any other audio product.

  • High-quality Bluetooth audio

    The Bluetooth built into the A2+ Wireless speakers features aptX coding which is an advanced Bluetooth audio codec with very impressive sound. And even if your phone or tablet does not have aptX, the A2+ Wireless Bluetooth solution is backwards-compatible with SBC and AAC codecs, so you can wirelessly stream music from any Bluetooth-enabled device and still enjoy all your music. High-fidelity Bluetooth aptX that really works and sounds great.

    Extended wireless range. Most Bluetooth implementations have very limited range, typically within just one room. But with careful signal management circuitry and antenna tuning, we offer a superior solution that has up to 3 times the range of standard Bluetooth for multi-room use, with no degradation in audio quality.

  • Amplifier design

    The amplifiers in powered Audioengine speakers are located in the left speaker and are a conservatively-rated class A/B analog monoblock design. This is a more traditional speaker/amplifier configuration which provides excellent quality audio and greater flexibility. All circuit boards for the power and preamp sections are vertically mounted for maximum mechanical shock protection.

  • Driver designs

    Audioengine uses audiophile-quality, ferrofluid-cooled silk dome tweeters with neodymium magnets. Silk tweeters hold up well under high power and the edge-driven design gives very smooth response. The woofers are aramid fiber woven glass composite with rubber surrounds. Aramid fiber is obviously very strong, which means the woofer retains its shape when being driven at high levels.

  • Sheilding

    Both of A2+ Wireless speaker drivers are directly magnetically-shielded.

Sorry!
No Luck Today...
Close, But...
Almost!
Free B2
Wireless Speaker
Free A5+
Classic Speakers
Get your chance to win a prize!
Enter your email address and spin the wheel. This is your chance to win amazing discounts!
Our in-house rules:
  • One game per user
  • Cheaters will be disqualified.